Die Plattform für wissenschaftliche und pädagogische Werkarbeiten

Electroquiz

Building an electroquiz is a good way to experiment simple electrical connections.

 

This project is not only technical, the question & answer part can exercise different skills (writing, spelling, drawing, general knowledge, calculation,...).


Schwierigkeit
Einfach
Dauer
2h
Benotung
5/5
Preis
~ 8 CHF
Erfahrungsberichte
0

Material
Werkzeuge
Schablonen&Pläne
Realisierung
Cut and strip both ends of the following wires: 2 x 35 cm 1 x approx. 5 cm 5 x approx. 20 cm   Using the soldering iron, add tin ... With the help of the model that you can download in the blueprints/plans section, mark the positions of the holes on the ...Slide 14 brads (brass fasteners) through the slits. With the help of five 20 cm wires, form five pairs left to right of your choice between the ten central brads.   ... Using a soldering iron, solder the 5 cm wire to one side of the battery support and the 35cm one to the other side.   ... Attach the other end of the 5 cm wire to one side of the bulb socket.   Attach the other 35 cm wire to the other socket ... Cut two strips of paper in a A4 sheet as shown on the photo.   They will be used to write down the questions and answers. On one strip of paper, write your five questions at the hight of the brads.   On the other strip of paper, write the ...
Anwendung
Links&Referenzen
Datum30.04.2013
AutorEmmanuelle
Organisationinfo-energie
ÜbersetzerMartin
GebrauchKommunizieren, Information übertragen
BereichElektronisches/Elektrisches, Robotik
Sprachefrançais deutsch english
Lizenz