La plate-forme collaborative de bricolages scientifiques et pédagogiques

Anti-monster flash light & buzzer

Building this very special Anti-monster flash light & buzzer is a nice way to experiment an electrical circuit a bit more complex than the usual battery/bulb/switch one.

 

Avertissement Beware that once completed, this is a very noisy device...

 

This project uses a very energy efficient LED (light emitting diode) that has also a very long lifetime. Household light bulbs using this technology are now on the market and might replace one day fluorescent light bulbs.


Difficulté
Facile
Durée
2h
Note
3/5
Prix
~ 8 CHF
Témoignages
0

Matériel
Outils
Chablons&Plans
Réalisation
Saw the wood slat to create the following 4 pieces: Two 14 cm long pieces One 8.5 cm long piece One 6.5 cm long and 3dm wide ... Collect all the elements for the electrical part : -buzzer -strip of 4 connectors -resistance -LED -ttwo 20cm long ... Connect the different components according to the photo and the diagram that you can download in the ...A close-up view of the previous step. Fold the paper clip and cut part of it to be able to insert it into the hole with the first screw.   I should touch the screw ...Nail the three pieces of wood to the small board to form a box. Using a hot glue gun, fix the buzzer and the strip of connectors.   Twist the ends of the two free wires around brass tacks ...Close-up view to better understand the previous step... Slide the battery in place and add a small piece of wood to squeeze the battery in place.     If you want, you can add a cardboard lid and decorate it as you wish.   Cut an opening so the led and the switch are not ...
Fonctionnement
Liens&Références
Date01.05.2013
AuteurEmmanuelle
Organismeinfo-energie
TraducteurMartin
FinalitéProduire de la lumière ou de la chaleur
DomaineRobotique, montage électrique/électronique
Langue(s)français deutsch english
License